Boiling Copper Fin Tube
Boiling Copper Fin Tube
| Standard Size | Plain End Dimensions | Finned Section Dimensions | |||||
| OutsideDiameter
inch(mm) |
Nominal Wallinch (mm) | OutsideDiameter
inch(mm) |
Nominalw.t.
inch(mm) |
Fin Heightinch(mm) | Min wallUnder Fins
inch(mm) |
Num-ber offin | Inner Fin Height (mm) |
| Dimensional Data—19Fins Per Inch | |||||||
| 5/8(15.88) | 0.035(0.889) | 0.623(15.82) | 0.052(1.32) | 0.063(1.588) | 0.031(0.787) | 34 | 0.40 |
| 3/4(19.05) | 0.028(0.711) | 0.743(18.87) | 0.049(1.24) | 0.063(1.588) | 0.025(0.635) | 36 | 0.40 |
| 1(25.4) | 0.049(1.254) | 0.998(25.35) | 0.065(1.65) | 0.063(1.588) | 0.044(1.118) | 38 | 0.40 |
| Dimensional Data—26Fins Per Inch | |||||||
| 5/8(15.88) | 0.035(0.889) | 0.623(15.82) | 0.052(1.32) | 0.063(1.588) | 0.031(0.787) | 34 | 0.40 |
| 3/4(19.05) | 0.028(0.711) | 0.743(18.87) | 0.049(1.24) | 0.063(1.588) | 0.025(0.635) | 36 | 0.40 |
| 1(25.4) | 0.049(1.254) | 0.998(25.35) | 0.065(1.65) | 0.063(1.588) | 0.044(1.118) | 38 | 0.40 |
| Dimensional Data—35Fins Per Inch | |||||||
| 3/4(19.05) | 0.028(0.711) | 0.748(19.00) | 0.043(1.09) | 0.038(0.953) | 0.023(0.584) | 36 | 0.40 |
| 3/4(19.05) | 0.035(0.889) | 0.748(19.00) | 0.050(1.27) | 0.038(0.953) | 0.030(0.762) | 36 | 0.40 |
| 3/4(19.05) | 0.042(1.067) | 0.748(19.00) | 0.058(1.47) | 0.038(0.953) | 0.037(0.940) | 36 | 0.40 |
| Dimensional Data—42Fins Per Inch | |||||||
| 5/8(15.88) | 0.025(0.635) | 0.623(15.82) | 0.047(1.19) | 0.056(1.422) | 0.022(0.559) | 34 | 0.40 |
| 3/4(19.05) | 0.028(0.711) | 0.748(19.00) | 0.043(1.09) | 0.034(0.864) | 0.025(0.635) | 36 | 0.40 |
| 1(25.4) | 0.049(1.254) | 0.998(25.35) | 0.058(1.47) | 0.034(0.864) | 0.037(0.935) | 38 | 0.40 |
| Dimensional Data—50Fins Per Inch | |||||||
| 5/8(15.88) | 0.025(0.635) | 0.623(15.82) | 0.047(1.19) | 0.056(1.422) | 0.022(0.559) | 34 | 0.40 |
| 3/4(19.05) | 0.028(0.711) | 0.748(19.00) | 0.043(1.09) | 0.034(0.864) | 0.025(0.635) | 36 | 0.40 |
| 1(25.4) | 0.042(1.254) | 0.998(25.35) | 0.058(1.47) | 0.034(0.864) | 0.037(0.935) | 38 | 0.40 |
Specification:
This tube has unique fin form. Fins are inter-connected via specially designed duct under the fin. Such design is helpful for continuous overflow of bubbles when the refrigerant boils. The fin has different form when machine unit has different heat flux. It is suitable for water chilling machine unit with full fluid. Packed in wooden boxes.
Related Products
Air Conditioner Copper Filter dryer
Air Conditioner Copper Filter dryer
Hurry Up!
Offer ends in:
Air Conditioner Copper Filter dryer
Air Conditioner Copper Filter dryerCopper filter dryer is made from Copper inside with molecular and filter screen
Copper Filter dryer Features
- Compact design and low weight
- High efficient in moisture absorption and filtering impurity
- Hybrid desiccant
- Solid filter
- Filtering Fineness:100
- Connection type: solder
General specifications of Copper Filter dryer
- Applicable for all common HCFC, HFC and CFC refrigerants such as: R134a, R404A, R407C, R410A, R50
- TS min./max.: -30°C / +80°C
- PS: 4,2 MPa
- Mesh Number of Screen: 100mesh/In, 150mesh/In;
- All inlets and outlets protected by plastic caps, Solder Seal or Vacuum Plastic Bags;
- The Copper Filter Dryer/Copper Spun Desiccant Dryer is installed ahead of throttling elements in air-conditioner, refrigerator and freezer. It helps absorb the remained moisture and filtrate contamination that may block capillary, so as to avoid system block by ice or by dirt;
Refrigerator Copper Filter dryer
Refrigerator Copper Filter dryer
Hurry Up!
Offer ends in:
Refrigerator Copper Filter dryer
Refrigerator Copper Filter dryerRefrigerator Copper Filter dryer
Copper filter dryer is made from Copper inside with molecular and filter screen
| Part No. | Molec.Sieve | Size(Dia,xL) | Inlet(Inner Dia.) | Outlet(Out Dia.) |
| WJ-FD10 | 10g | 16mmx113mm | 6.35mm | 2.5mm |
| WJ-FD15 | 15g | 19mmx115mm | 6.35mm | 2.5mm |
| WJ-FD20 | 20g | 24mmx125mm | 6.35mm | 2.5mm |
| WJ-FD30 | 30g | 24mmx140mm | 6.35mm | 2.5mm |
| WJ-FD40 | 40g | 24mmx150mm | 6.35mm | 3.1mm |
| WJ-FD50 | 50g | 29mmx160mm | 6.35mm | 3.1mm |
Refrigeration Access Valves
Refrigeration Access ValvesAlso named Filling Valves,Refrigeration Charging Valves,Refrigeration Service Access Valves,Braze Refrigeration Air Conditioning,Service Access Valve, Refrigeration Charge Port,Air conditioning Copper Extension Tube access port,Needle Refrigerant Freon HVAC Check Charging Valves.refrigeration access valves and accessories for your commercial refrigeration and air conditioning systems,it is used to vacuum or charge refrigerant during maintenance of air conditioning system of R22, R407c or R410a. Made with top quality copper pipe, with brass needle, and welding T2 copper tube. Standing Pressure 3.5 MPA .It is widely used to charge various refrigeration and air conditioning refrigerant. It is a fine-tuning valve needle valve plug is mainly used to adjust the refrigeration flow. Trim valves require valve port open gradually increases from off to on the maximum continuous finely adjusted.
Reviews
There are no reviews yet.