Digital Clamp Meter DT-87
Digital Clamp Meter DT-87
Input impedance: 9MΩ
Overload Protection 600V DC/Peak AC on all ranges
Features:
- Continuity Beeper
- Data-Hold Function
- Small Size, Lightweight
- Power Source: UM-4 or AAA 1.5 batteryx2
- Resistance: 0.1 to 400 Ohm to 40M Ohm
- Capacitance: 10pF to 1000uF
The meter is completely portable, LCD, 3 ½ digit clamp meter. It has a rugged design, is easy to hold in the operator’s hand, and convenient to use.
Operating Features:
AC Current 0.01A to 400A
AC Voltage 1V to 450V
DC Voltage 1V to 600V
The meter display is a liquid crystal assembly providing a readable display in all light conditions. The decimal point is automatically positioned, and the polarity sign (minus) is lighted for negative DC measurement (plus is undertaken if no sign appears) so that the display is direct reading in units selected at the rotary switch. Over range, measurements are indicated by blanking all but the MSD, decimal point, and polarity sign (if negative). In addition, the display includes a low battery is an indication. If the low battery is indicated, the operator should replace the used battery with a new one.
Specifications
AC Current
| Range | Resolution | Accuracy (50Hz – 60Hz) |
| 20A | 10mA | +/- (3% of reading +5 digits) |
| 200A | 100mA | +/- (2.5% of reading +5 digits) |
| 400A | 1A | +/- (3% of reading +5 digits) |
AC Voltage
| Range | Resolution | Accuracy (50Hz – 500Hz) |
| 450A | 1V | +/- (2% of reading +4 digits) |
Input impedance: 9MΩ
Overload Protection 450V AC/DC on all ranges
DC Voltage
| Range | Resolution | Accuracy (50Hz – 500Hz) |
| 600A | 1V | +/- (1.2% of reading +34 digits) |
Related Products
Analog Clamp MultiMeter – 7110 – SIGMA
Analog Clamp MultiMeter – 7110 – SIGMA
Hurry Up!
Offer ends in:
Analog Clamp MultiMeter – 7110 – SIGMA
Analog Clamp MultiMeter – 7110 – SIGMAAnalog Clamp MultiMeter – 7110 – SIGMA
Digital Clamp Multimeter VMC-1 ValueVCM-202
Digital Clamp Multimeter VMC-1 ValueVCM-202
Hurry Up!
Offer ends in:
Digital Clamp Multimeter VMC-1 ValueVCM-202
Digital Clamp Multimeter VMC-1 ValueVCM-202Wide Range of Measurements
. Suitable for measuring A/C D/C voltage, AC Current resistance, diode.
LCD Back light Display
. Clearly Display easy to read.
Energy saving design
. Automatic shut down for saving energy and low battery alarm.
Compact Design
. Compact Design, Smooth line, Easy to carry.
Value Clamp meter VMC-1
Value Clamp meter VMC-1| LCD display | max. disp. value 4099 |
| Polarity display | automatic |
| Overload display | “OL” or “-OL” |
| Low battery indication | yes |
| Measurement deviation | if the conductor being measured is not placed in the center of the jaw during current measurement, it will cause extra ±1.0% reading error. |
| Drop test | 1m drop test passed |
| Max. jaw opening | 28 mm |
| Max. current conductor size | 28 mm |
| Power supply | 2 x AAA 1.5V |
Uni-T Digital Clamp Meter Ut201+ Ac Dc Current Amperimetro Tester Clamp Multimeter Resistance Frequency Tester
Uni-T Digital Clamp Meter Ut201+ Ac Dc Current Amperimetro Tester Clamp Multimeter Resistance Frequency Tester
Hurry Up!
Offer ends in:
Reviews
There are no reviews yet.