Cooling Copper Tube
Cooling Copper Tube
| Standard Size | Plain End Dimensions | Finned Section Dimensions | ||||||||
| OutsideDiameter
inch(mm) |
Nominal Wallinch (mm) | OutsideDiameter
inch(mm) |
Nominalw.t.
inch(mm) |
Fin Heightinch(mm) | Min w.t.Under Fins
inch(mm) |
Num-ber offin | Inner Fin Height (mm) | |||
| Dimensional Data—19 Fins Per Inch | ||||||||||
| 5/8(15.88) | 0.035(0.889) | 0.052(15.82) | 0.052(1.32) | 0.063(1.588) | 0.031(0.787) | 34 | 0.40 | |||
| 3/4(19.05) | 0.028(0.711) | 0.049(18.87) | 0.049(1.24) | 0.063(1.588) | 0.025(0.635) | 36 | 0.40 | |||
| 1(25.4) | 0.049(1.254) | 0.065(25.35) | 0.065(1.65) | 0.063(1.588) | 0.044(1.118) | 38 | ||||
| Dimensional Data—26 Fins Per Inch | ||||||||||
| 5/8(15.88) | 0.035(0.889) | 0.052(15.82) | 0.052(1.32) | 0.063(1.588) | 0.031(0.787) | 34 | 0.40 | |||
| 3/4(19.05) | 0.028(0.711) | 0.049(18.87) | 0.049(1.24) | 0.063(1.588) | 0.025(0.635) | 36 | 0.40 | |||
| 1(25.4) | 0.049(1.254) | 0.065(25.35) | 0.065(1.65) | 0.063(1.588) | 0.044(1.118) | 38 | ||||
| Dimensional Data—35 Fins Per Inch | ||||||||||
| 3/4(19.05) | 0.028(0.711) | 0.748(19.00) | 0.043(1.09) | 0.038(0.953) | 0.023(0.584) | 36 | 0.40 | |||
| 3/4(19.05) | 0.035(0.889) | 0.748(19.00) | 0.050(1.27) | 0.038(0.953) | 0.030(0.762) | 36 | 0.40 | |||
| 3/4(19.05) | 0.042 (1.067) | 0.748(19.00) | 0.058(1.47) | 0.038(0.953) | 0.037(0.940) | 36 | 0.40 | |||
| Dimensional Data—42 Fins Per Inch | ||||||||||
| 5/8(15.88) | 0.025(0.635) | 0.623(15.82) | 0.049(1.19) | 0.056(1.422) | 0.022(0.559) | 34 | 0.40 | |||
| 3/4(19.05) | 0.028(0.711) | 0.748(19.00) | 0.043(1.09) | 0.034(0.864) | 0.025(0.635) | 36 | 0.40 | |||
| 1(25.4) | 0.049(1.254) | 0.998(25.35) | 0.058(1.47) | 0.034(0.864) | 0.037(0.935) | 38 | 0.40 | |||
Specification:
The sharp boss in radial and axial directions on fin end of the tube can separate refrigerating drops and reduce their surface tension to make them drop faster. It has strong condensation effect. It is suitable for shell &tube heat exchange. Packed in wooden boxes.
Related Products
Air Conditioner Filter dryer
Air Conditioner Filter dryerWe use 100% 3A molecular sieve core in the Filter Drier,it has strong drying capability to maximum reduce the risk of hydrolyze acid reaction,and it can work with HFC refrigerant (R134a, R404A, R410A) which is used with POE & PAG oil together,it is also an non-oil consuming additive compatible with R22.
Feature:
1.Additives consuming no oil
2.joint type:ODFor SAE
3.Corrosive resistance mold
4.Max working pressure:4.70Mpa/680PSIG
Removable male to copper connector
Removable male to copper connector
Hurry Up!
Offer ends in:
Brass female to copper connector
Brass female to copper connector
Hurry Up!
Offer ends in:
Copper Inverting Connector to connect copper pipe
Copper Inverting Connector to connect copper pipe
Hurry Up!
Offer ends in:
Reviews
There are no reviews yet.